Toto NEOREST MS990CG - Manual (Page 18)

18
Motion Detection
Sensor
(light goes out)
● When the motion detection sensor fails to detect motion,
the "sensor" light on the Main Unit Display will go out.
2 Depending upon the height and position of the user, the motion detection sensor may not be able to detect
movement. In this case, use the remote controller to push Remote Control button for OPEN/CLOSE toilet
seat and lid.
1 Stand in front of the
toilet. Motion Detection
Sensor
(lights up)
If the lid does not open, move at least 1 foot away from the
toilet, wait 10 seconds, and then stand in front of the toilet
again. The lid will automatically open.
● When the motion detection sensor detects motion, the
"sensor" light on the Main Unit Display will light up.
● The motion detection sensor detects motion and the
lid opens automatically.
1
The Lid automatically opens
1 Before cleaning the toilet, be sure to set the Auto Lid OPEN/CLOSE to OFF. This will prevent the lid from
opening/closing while cleaning is performed.
After using the toilet,
move at least 1 foot away
from the toilet.
The lid will automatically close after 90
seconds.
2
● When raised with the controller and you do not
sit on the toilet seat for at least 6 seconds,
the lid will not automatically close.
When Sitting on the Toilet Seat