Deodorizer, Energy saving functions – Toto NEOREST MS990CG User Manual
Page 41
41
T
roubleshooting
Deodorizer
ProblemPossible Cause
Solution
Refer to the toilet seat sensor
instructions on page 44.
Clean the deodorizer filter.
(See page 33.)
—
The deodorizer is not
working.
Is the toilet seat sensor working properly?
Is the deodorizer filter dirty?
In the following situations, the toilet seat sensor
detects motion and activates the deodorizer:
●
when standing in front of the toilet seat;
●
when closing/opening the toilet seat and lid;
●
when cleaning the toilet;
●
when using the toilet bowl wash lever.
Odors are sometimes
not eliminated
thoroughly.
The deodorizer turns
on by itself.
Energy Saving Functions
ProblemPossible Cause
Solution
—
—
Energy Saving will not work correctly
on that day. The feature will begin
working on the next day.
User settings may be changed. Please
reset preferred settings.
(See page 23 or 25.)
The Auto ON/OFF
does not work even
after pushing the
button.
It may take 2~3 days to determine the correct
time frame for when the toilet is not used
frequently.
If the toilet is used at the same time 3 times a
week or more, the energy saving function may
not work. The time will not be considered an
energy save time.
In case of power failure or power cord
disconnect.
When batteries in remote controller are replaced.
The Energy Saving
functions fail to
operate.