Toto NEOREST MS990CG - Manual (Page 43)

43
T
roubleshooting
Remote Controller
ProblemPossible Cause Solution
Replace the batteries (See page 11.)
Reinsert the batteries in the correct
position.(See page 11.)
Remove any objects that may be
covering the transmitter.
Remove any dirt or water that may
have settled on the transmitter.
Refer to the toilet seat sensor
instructions on page 44.
Replace the batteries.(See page 11.)
The remote controller
does not work.
Do the batteries need replacing?
Are the batteries inserted in the correct position
(+/-)?
Is the remote controller transmitter covered with
something?
Is the remote controller transmitter dirty or wet?
Is the toilet seat sensor working properly?
Does the remote controller display momentarily
go out when the buttons are pushed?This is an
indication that the batteries are worn.
Remote Controlled Flushing
ProblemPossible Cause Solution
Replace the batteries. (See page 11.)
The remote control buttons for flushing
the toilet bowl cannot be pushed
repeatedly. Wait 10 seconds before
pushing the buttons again.
Remove any dirt or water that may
have settled on the transmitter.
Nothing happens
when the remote
control button for
flushing the toilet
bowl is pushed.
Do the batteries need replacing?
Has the button been pushed repeatedly?
Is the remote controller transmitter dirty or wet?
Remote Controlled Toilet Seat/Lid OPEN/CLOSE
ProblemPossible Cause Solution
Replace the batteries. (See page 11.)
Remove any dirt or water that may
have settled on the transmitter.
Nothing happens
when the remote
control button for
opening/closing the
toilet seat/lid is
pushed. Do the remote control batteries need replacing?
Is the remote controller transmitter dirty or wet?