Cleaning the water supply filter – Toto NEOREST MS990CG User Manual
Page 34
34
Other Care and Maintenance
Cleaning and inspecting the power plug.
Remove the power plug.
●
Grasp plug (never the cord) and pull straight
out.
●
Check the power plug once a month to make sure that it is in proper working condition.
Power plug
Clean the power plug
●
Remove any dirt and dust that has collected on
the plug prongs with a dry cloth.
Dry cloth
Insert the power plug
●
Insert the power supply plug all the way into the
wall outlet.
Cleaning the water supply filter.
Shut off the water valve and turn off the
water supply.
●
Shut off the water valve with the wrench provided.
●
When the water pressure gets low, it's time to clean the feed water supply filter.
Turn to the right
Wrench or flat
head screwdriver
Water shutoff
valve
Do not remove the water supply
filter with the water shutoff valve
in the OPEN position
Prohibited
Caution!