Toto NEOREST MS990CG - Manual (Page 21)

21
2, 3
When finished, move
away from the toilet
(more than one foot).
After 3 seconds the toilet will
automatically flush
(light goes out)
Motion
Detector
● When the motion detection sensor does not detect
motion near the toilet, the sensor light located on the
main unit control goes out.
2 The default setting for the Auto flush is ON.
3 ● The auto flush will not function if the user sits on the toilet or stands in front of the toilet for less than 6
seconds. In this case, use the remote controller flush button to flush the toilet.
● Depending upon the height and position of the user, the toilet may not automatically flush.
Automatic Flushing
●
The toilet will automatically flush when the user moves away from the toilet. (This function prevents the
toilet bowl from being left unflushed.)
Auto Flush
ON/OFF button
"FLUSH" is displayed
Confirm that the "Flush" function is displayed from the remote controller display.
● You must sit on the toilet seat for at least 6
seconds in order to activate the automatic
flush function.
1.6 Gallons per Flush (6 LPF)
When sitting on the toilet
seat
Operation