Toastmaster TBR15CAN - Manual (Page 16)

15. 14. Bread Maker Use and Care Guide
4 Insert bread pan and push down on rim until it snaps
securely into place. Fold handle down.
• If the pan does not snap securely into place, remove
bread pan. Wearing oven mitts, place fingers behind
bread pan clips and gently pull away from oven wall.
Insert bread pan again.
5 Close the lid. Plug into 120 V ~ 60 Hz outlet. The
bread maker display indicator will default to 1P and
then 3:00.
6 Press the PROGRAM button to choose the desired program. Each time the PROGRAM button is
pressed, you will hear a beep and the number in the display window will advance to the next
program. The indicator light next to the program selected will be on.
Press the CRUST COLOR button to choose crust color desired (except for the FAST BAKE ™ and
QUICK BREAD programs). When you press the button, you will hear a beep and the display
window will show the color selected.
L = Light color
P = Medium color
H - Dark color
7 Press the START/STOP button. The time left for the program to be finished is displayed. The
timer will count down in one minute increments. All programs except QUICK BREAD, DOUGH
and BAKE will beep to add additional ingredients during
the second knead. Opening the lid will not stop the kneading.
Add ingredients quickly and evenly over dough. Quickly close
the lid to prevent heat loss. At this time also check the dough
ball and use a rubber spatula to scrape ingredients from the
sides of the pan.
8 The beeper will sound when the bread is done. Press the
START/STOP button and hold it until you hear a beep.
Hold the lid open while you remove the bread pan using
oven mitts. If you do not stop the unit and remove the bread, it
will automatically go into the keep warm process on all programs
except for DOUGH. Your bread will be kept warm for 1 hour. You
may remove the bread pan at any time during the keep warm
cycle. To turn off the keep warm feature before the 1 hour is up,
press the START/STOP button and hold it until you hear a beep.
NOTE: If you wish to make another loaf of bread right away, allow the bread maker to cool down for
10 to 15 minutes with the cover open and pan removed. If you attempt to use the unit too soon, it will
signal and display will read E:01. Press Start/Stop until screen reverts to setting display and wait until
unit has cooled.
9 Turn the bread pan upside down and shake to release the
bread.
Place the bread upright on a wire rack to cool 20-30 minutes
before cutting. This allows the steam to escape. Be sure to
remove the kneading blade from the bread.
CAUTION:
• The bread pan, kneading blade and bread will be
very hot.
• Always unplug after use.