Toastmaster TBR15CAN - Manual (Page 30)

29. 28. Bread Maker Use and Care Guide
FAST BAKE ™ Breads
We suggest starting your FAST BAKE ™ bread baking with this White Bread Recipe. Refer to Helpful
Hints for Bread and Dough for measuring information. Follow each step carefully, noticing the water
temperatures must be 110°-115°F/43°-46°C and that QUICK•RISE
™ , RapidRise or Bread Machine yeast
must be used.
White Bread
1.5 lb. loaf
Water 110°-115°F/43°-46°C 1 cup + 2 TBL
Oil 2 TBL
Sugar 2 TBL
Salt 1 tsp
Bread Flour 3 cups
RED STAR ®
QUICK•RISE ™ Yeast 1 TBL
or
Bread Machine Yeast
1 TBL
Program: FAST BAKE ™
1. Remove the bread pan from the bread maker. Attach the kneading blade onto the shaft. Make
sure all ingredients, except water, are at room temperature.
2. Use a liquid measuring cup to measure the water (110°-115°F/43°-46°C) and pour into the bread
pan.
3. Use a measuring spoon to measure the oil and add to the bread pan.
4. Use a measuring spoon to measure the sugar and salt; level off with the straight edge of a knife
and add to the bread pan.
5. Lightly spoon bread flour into a dry measuring cup; level off with the straight edge of a knife and
add to the bread pan. Smooth into all corners. Lightly tap pan on counter 3 times to settle all dry
ingredients.
6. Carefully measure QUICK•RISE ™ yeast with a measuring spoon; level off with the straight edge of
a knife and add to the bread pan.
7. Place the bread pan into the bread maker. Push down on rim until it snaps into place. Close the
lid.
8. Select desired FAST BAKE ™ program, and press START.
9. About five minutes into the kneading process, check the dough ball. It should be sticky to the
touch. At this time, push down any dough or flour that may be on the sides of the pan.
10. When the beeper sounds, the bread has finished baking.
11. Use oven mitts to carefully remove the bread pan.
CAUTION: THE OVEN CAVITY, BREAD PAN, KNEADING BLADE AND BREAD WILL BE VERY
HOT. USE OVEN MITTS.
12. Turn bread pan upside down and shake several times to release the bread. Do not use metal
utensils inside the bread pan or machine. Remove the kneading blade and allow loaf to cool
standing upright on wire rack approximately 20 minutes before cutting.
13. When the bread has completely cooled, approximately 1 hour, store in an air tight container.
14. UNPLUG UNIT BEFORE CLEANING. DO NOT IMMERSE THE BREAD PAN IN WATER, see
CLEANING AND STORING.
FAST BAKE ™ Breads . . . As Easy As 1 - 2 - 3
The FAST BAKE ™ program, with hotter rise and bake temperatures, is convenient for baking a hot
fresh loaf of bread in under an hour. The longer bread programs, with lower rise and bake
temperatures, will bake a taller more developed loaf of bread. And remember, you can always use the
delay feature for the longer programs.
1. Add ingredients to the bread pan in the order listed. Refer to Helpful Hints for Bread and Dough
for measuring information. Place the bread pan in the bread maker.
2. Close the lid. Select the FAST BAKE ™ program and press START.
3. When finished baking, remove bread pan from the bread maker. Invert and shake to remove the
loaf. Allow loaf to cool standing upright on a wire rack before slicing.
FAST BAKE ™ PROGRAM HINTS
◆ Water temperature must be 110°-115°F/43°-46°C.
◆ Larger amounts of QUICK•RISE™, RapidRise™ or Bread Machine yeast must be used. They may
be substituted in equal amount.
◆ The dough ball for the FAST BAKE ™ program should be a very soft, sticky to the touch, loose ball
with a smooth texture. Do not add extra flour.
◆ Check the dough ball at the beep, and if necessary, use a rubber spatula to push any flour or dough
from the sides of the bread pan down into the dough ball.
◆ As a result of the increased temperatures during the rise and bake process, the loaf of bread
produced from this program may have a dark crisp crust with a split on the top side of the loaf.