Toastmaster TBR15CAN - Manual (Page 4)

3. 2. Bread Maker Use and Care Guide
Grounded 3-Conductor Plug (Model TBR15CAN)
The model TBR15CAN appliance is equipped with a grounded-type 3-wire cord (3-prong plug). This
plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature. If the plug
should fail to fit the outlet, contact an electrician to replace the obsolete outlet. Do not attempt to
defeat this safety feature.
This product is for household use only.
Before Your First Use
Please fill out information that follows warranty.
Unpack and clean bread maker; see CLEANING AND STORING.
Place bread maker on a dry, stable surface away from burners and away from areas where cooking
grease or water may splatter onto it. Avoid placing it where it may tip over during use. Place on back
of counter top.
The bread maker will bake up to a 1 1 ⁄
2
pound loaf of bread. Do not put a larger quantity of ingredients
into the bread pan than recommended. If you do so, the bread may not mix or bake correctly and the
bread maker may be damaged. The maximum amount of ingredients to be used is as follows.
Bread programs — 3 - 3 1 ⁄
2
cups
Quick Bread programs – 2 - 3 cups
Dough program — 4 - 4
1 ⁄
2
cups
During first use, this product may smoke and/or emit an odor from mineral oils used in
manufacturing. This is normal for a newly manufactured appliance. Before first use, operate with
empty bread pan inside the bread machine on the FAST BAKE program to burn off the
manufacturing oils. Leave the lid up during the process.
POWER OUTAGE
Your bread maker has a 10-minute power interrupt feature. If the electricity goes off, the memory will
store the course in process for up to 10 minutes. If the power comes back on within this time, the
course will resume where it left off. If the bread maker loses power for more than this time and you
are using any dairy products, perishables or meat in your bread, you should discard the contents of
the recipe and start again with new fresh ingredients due to health and sanitary considerations.
For non-perishable recipes you may try starting the bread maker at the beginning of the course again
for all courses except FAST BAKE
™ . This may not always produce an acceptable loaf. If you are not
sure when the outage occurred, remove the dough ball from the bread pan and place in an oven-safe
baking container. Allow to double in size and place in a preheated 350°F/177°C oven for 30-45
minutes or until done. The bread will sound hollow when tapped on top of the loaf if it is done.
If you are using the FAST BAKE ™ course or if the bread has already begun to bake when the outage
occurs, you must begin with new ingredients.
The power interrupt will not cover power surges. If you experience frequent power surges, use a surge
protector.
WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal
injury or death. Please follow all safety instructions.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and injury to persons, including the following:
◆ Read all instructions before using this appliance.
◆ Do not immerse cord, plug, or appliance in water or other liquid (see instructions for cleaning).
◆ Do not touch hot surfaces. Always use oven mitts when handling the hot bread pan or bread.
◆ Close supervision is necessary when this appliance is used near children.
◆ This appliance is not for use by children. Keep out of reach of children.
◆ Unplug from outlet when not in use and before cleaning. Allow to cool before attaching or
removing parts.
◆ Avoid touching moving parts. Do not remove the bread pan during operation. Stop pad must be
pressed if bread pan is to be removed before completion.
◆ Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions, or
has been dropped or damaged in any manner. Return appliance to the nearest authorized service
facility for examination, repair, electrical or mechanical adjustment.
◆ Do not use outdoors or while standing in damp area.
◆ Do not let cord hang over edge of table or counter or touch hot surfaces.
◆ Do not place on or near a hot gas or electric burner or in a heated oven.
◆ To unplug, grip the plug and pull out from the wall outlet. Never pull on the cord.
◆ Do not unplug while unit is in operation.
◆ Do not use appliance except as indicated in these instructions.
◆ Use accessory attachments only if recommended by Toastmaster Inc.
◆ Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts.
◆ Bread maker must be placed at least 4 inches (10.2 cm) from walls and edge of counter.
◆ Do not cover bread maker with anything which would prevent the steam from escaping. This may
cause warpage, discoloration, malfunction or even fire.
SAVE THESE INSTRUCTIONS
CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from
becoming entangled in or tripping over a longer cord. Extension cords are available from local
hardware stores and may be used if care is exercised in their use. If an extension cord is required,
special care and caution is necessary. Also the cord must be: (1) marked with an electrical rating of
125 V, and at least 10 A., 1250 W., and (2) the cord must be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or tripped over accidentally.
If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
ELECTRIC POWER: If electric circuit is overloaded with other appliances, your bread maker may not
operate properly. The bread maker should be operated on a separate electrical circuit from other
operating appliances.
Polarized Plug (Model TBR15)
The model TBR15 appliance has a polarized plug, (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way.
READ AND SAVE THESE INSTRUCTIONS