Tyco Electronics P5200 - Manual (Page 112)

MM23772, Rev. F
112
11.9.2 P7250 and P5250 Model
1. Press  to toggle scan OFF and verify is not displayed.
2. Select channel.
3. Press  once to remove channel from the list.
4. Press  once to add as a normal channel.
5. Press  twice to add as a Priority 2 channel.
6. Press  three times to add as a Priority 1 channel.
7. Press  to re-start scanning.
11.10 NUISANCE DELETE (P7270 MODEL)
A channel can temporarily be deleted from the scan list if it is not the currently selected channel.
1. Turn Scan ON.
2. When the radio receives a call on the channel, press the  . The channel is removed from the scan
list until the radio is power cycled.
11.11 BACKLIGHT ON/OFF
1. Press  to access the menu.
2. Press  or  to scroll through menu until “BCKLGHT” appears.
3. Press  to select Backlight menu.
4. Press  or  to toggle backlight ON and OFF.
5. Press

to select new backlight setting.
11.12 CONTRAST ADJUST
1. Press  to access the menu.
2. Press  or  to scroll through menu until “CONTRAST” appears.
3. Press  to select Contrast menu.
4. Press  or  to adjust contrast setting from 1 - 4.
5. Press  to select new contrast setting.
11.13 DECLARE AN EMERGENCY
1. Press and hold the red Emergency/Home button (the length of time is programmable; check with the
system administrator).