Tyco Electronics P5200 - Manual (Page 92)

MM23772, Rev. F
92
10.4 TRI-COLOR LED
Figure 10-5: Tri-Color LED
The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the
radio (see Figure 10-5). The three colors of the LED and the status they represent are:
Green: Receiving.
Red: Unencrypted transmission.
Orange: Encrypted transmission (P7200 only).
10.5 STATUS MESSAGES
During radio operation, various radio Status Messages can be displayed. The messages are described
below.
MESSAGE NAME DESCRIPTION
TALKARND Talkaround Indicates the radio is operating on conventional channels in
talkaround mode (no repeater).
LOW BATT Low Battery Battery voltage has dropped to the point to where the radio is no
longer able to transmit. The radio still receives calls until the battery
is discharged beyond the point of operation, at which time the radio
automatically shuts down.
RXEMER Receive
Emergency Indicates an emergency call is being received. This message flashes
on line two.
TXEMER Transmit
Emergency Indicates an emergency call has been transmitted on this radio. This
message flashes on line two.
WHC Who Has
Called Indicates an individual call has been received, but not responded to.
The indicator turns OFF if the individual call mode is entered, the
system is changed, or the radio is turned off and then on again.
UNKNOWN Unknown ID Indicates an individual call is being received from an unknown ID.