10 alert tones – Tyco Electronics P5200 User Manual

Page 32

Advertising
background image

MM23772, Rev. F

32

8.10 ALERT TONES

The P7200 and P5200 radios provide audible Alert Tones or “beeps” to indicate the various operating
conditions (see Table 8-3).

Table 8-3: Alert Tones

NAME

TONE

DESCRIPTION

Call Queued

1 low tone/2 high tones

Call queued for processing.

Call Denied

3 short beeps

Radio is out of coverage area or requested talk group is
active.

Grant (or Go-Ahead)

1 short beep

Sounds when resources become available for a call
request placed in the queue (if enabled) upon channel
access.
If the radio roams to another site while transmitting, then
it will auto rekey and begin transmitting on that tower. It
gives a second grant tone to let the user know they have
roamed.

Call Removed

1 long low-pitched tone

Notifies the user access to the channel has been lost
(out of coverage area or pre-empted by higher-priority
call).

Low Battery

1 low-pitched/one short mid-
pitched

Low battery.

Selective Alert
Received

1 short tone, two short
beeps, and one short tone

Only played once to indicate a selective alert has been
received.

Emergency Tone

3 long tones

Indicates an emergency was declared.

Client Connect Tone

2 short beeps

Indicates the portable is connected to the V-TAC in
XCOV or XCOV-TG.

Client Disconnect
Tone

2 short beeps (lower-pitch
than Client Connect Tone)

Indicates the portable has disconnected from the V-TAC.

Emergency Cleared
Tone

1 long low-pitched tone

Sounds when an emergency is cleared.

Selective Call Ring
Tone

ringing tone similar to a
telephone

Ringing is repeated every four (4) seconds until the call
is accepted or rejected by the radio being called or until
the network drops the call if unanswered after one (1)
minute.

Roam Tone

2 short tones, one high-
pitched and one low-pitched

Sounds when the radio transitions from one radio base
station site to another.

Out of Range Tone

3 brief tones

If enabled via programming, sounds when the radio is
not within operational range with base station.

Man Down Tone

1 long tone, 1 short beep

Indicates that the radio has assumed a horizontal
position, perhaps due to a threat or environmental
hazard.

Advertising
This manual is related to the following products: