Tyco Electronics P5200 - Manual (Page 98)

MM23772, Rev. F
98
The TX POWER menu item, when selected, toggles LOW/HIGH power. It does not use
 or  to scroll nor is an additional press of the  button required.
Table 10-5: Menu Item Information
FEATURE DISPLAY
PARAMETER
SETTING
COMMENT
Keypad Lock Menu Item:
KEY LOCK
Once Selected:
LOCKED Locked
Unlocked Locks the keypad. To unlock; press and release “M” then within 1
second press the option button (NOTE: this sequence is also a
short cut to locking the keypad.)
Backlight Adjust Menu Item:
BCK LIGHT
Once Selected:
BCKL= OFF/ON Selects the light level for backlighting.
Contrast Adjust Menu Item:
CONTRAST
Once Selected:
CNTRST= 1, 2, 3, 4 Selects the display contrast level.
Transmit Power
Select Menu Item:
TX POWER
Once Selected:
POWER= HIGH or LOW Selects radio output power mode.
Radio Revision
Information Menu Item:
REVISION N/A Selects the information display to view. Informational display only
(see Table 10-6). No user selectable settings.
Toggle Scan On/Off SCAN ON/OFF Toggles Scan operation ON/OFF.
Toggle Private Mode PRIVATE ON/OFF Toggles Private Mode ON/OFF.
Display Current
Encryption Key DISP KEY N/A Displays current encryption key. Informational display only. No
selectable settings.
Display Current Home
Group/Channel HOME N/A Selects Home Group/Channel.
Select Desired
System SYS SEL N/A Selects a new system.
Add Group/Channel to
Scan List SCAN ADD N/A Adds to Scan List.
Delete Group/Channel SCAN DEL N/A Deletes Group or Channel from Scan List.
Add/Delete Scan List SCAN A/D N/A Add or Delete from Scan List.
Talkaround TALKARND ON/OFF Conventional Only. Toggles Talkaround feature ON/OFF.
Select Channel CHN SEL N/A Conventional Only.
Feature Encryption
Display Menu Item:
FEATURES N/A Indicates current features programmed into the radio as well as
certain information required to add features to the radio.
Informational display only. No user selectable settings.