Tyco Electronics P5200 - Manual (Page 70)

MM23772, Rev. F
70
FEATURE DISPLAY
PARAMETER
SETTING
COMMENT
Transmit Power Select Menu Item:
TX POWER
Once Selected:
POWER=
HIGH or LOW Selects radio output power mode.
Radio Revision
Information Menu Item:
REVISION N/A Selects the information display to view. Informational
display only (see Table 9-6). No user selectable settings.
Toggle Scan On/Off SCAN ON/OFF Toggles Scan operation ON/OFF.
Toggle Private Mode PRIVATE ON/OFF Toggles Private Mode ON/OFF.
Display Current
Encryption Key DISP KEY N/A Displays current encryption key. Informational display
only. No selectable settings.
Display Current Home
Group/Channel HOME N/A Selects Home Group/Channel.
Select Desired System SYS SEL N/A Selects a new system.
Add Group/Channel to
Scan List SCAN ADD N/A Adds to Scan List.
Delete Group/Channel SCAN DEL N/A Deletes Group or Channel from Scan List.
Add/Delete Scan List SCAN A/D N/A Add or Delete from Scan List.
Select Telephone
Numbers From Phone
List PHN CALL N/A Trunked Only.
Data Operation NO DATA ON/OFF Trunked Only. Toggles Data Operation ON/OFF.
Select Individual Call
from IC List IND CALL N/A Trunked Only.
Select Group GRP SEL N/A Trunked Only.
Feature Encryption
Display Menu Item:
FEATURES N/A Indicates current features programmed into the radio as
well as certain information required to add features to the
radio. Informational display only. No user selectable
settings.
System Scan Enable Menu Item:
SYS SCAN
Once Selected:
SYSC ON or
SYSC OFF ON/OFF Toggles System Scan feature ON/OFF.
Table 9-6: Information Display
PRS - NAME
XXXXXXXX
Personality Name
EEPR SIZ EEPROM Size
RAM SIZ RAM Size
FLSH SIZ Flash Size
RF BAND Frequency Band
HSD RATE Data Transfer Rate
PRS VER Software Version
DSP_ _RAM DSP Software Version
FLSH - VER FLASH Software
r - released, 01A - revision state
M/A-COM
(C) – 2004
Copyright