Tektronix 200 Series - Manual (Page 16)

2 Network Printing with Tektronix Color Printers
2-4 Network Utilities for Phaser Color Printers
TCP/IP authorization code
When the Ethernet option is installed, the EtherTalk and NetWare protocols
are immediately active. To acquire TCP/IP capability, another option is
required. Upon purchasing the TCP/IP option, you receive an authorization
code, which is sent to the printer to activate the TCP/IP protocol. If you
purchase the TCP/IP option initially with the printer, the authorization code is sent
to the printer at the factory (TCP/IP is active when you receive the printer). If you
add the TCP/IP capability later with a printer upgrade kit, you must send
the authorization code to the printer to activate TCP/IP. For speciÞc
instructions on sending the authorization code to the printer, see
ÒAuthorizing the TCP/IP protocolÓ on page 5-7.
The authorization code is printed on a certiÞcate. The certiÞcate is included
with your printer (if the TCP/IP option is factory-installed) or with the
upgrade kit (if the TCP/IP option is added later).
Note Retain the certiÞcate as proof-of-purchase for the TCP/IP option.
Tektronix service personnel may need to refer to this number if
your printer requires service.