Tektronix 200 Series - Manual (Page 86)

5 TCP/IP Configuration
5-22 Network Utilities for Phaser Color Printers
1. Make sure that the printer is connected to the network. ARP
(Address Resolution Protocol) requires that the printer be
connected on the same physical network segment as the host.
2. Log in as root.
3. Run the script conÞg-IP:
a. Change (cd) to the bin subdirectory in the directory where you
placed your printerÕs network utilities.
b. Type the name of the script, redirecting the output to a Þle.
Type:
conÞg-IP > filename
4. When prompted:
Will the printer be using either RARP or
BOOTP?
press Enter to accept the default (n for no).
5. When prompted, enter the IP addressing information.
6. When prompted:
Should the printer use adaptive encapsulation?
enter your choice; for most systems, you should enter y for on.