Tektronix 200 Series - Manual (Page 53)

Novell NetWare Configuration 4
User Manual 4-19
Monitoring print server activity
The Monitor menu enables you to view a print serverÕs current and logged
activity. You can view one print server at a time.
The Monitor menu has the following selections:
■ Begin monitor displays a list of Tektronix printers. Select the
printer you wish to monitor from the list and press Enter.
■ Monitor log (controls logging of print server activity to a Þle using
three submenus:)
■ Enable logging (starts and stops the log session)
■ Select log Þle (allows you to specify the name of the log Þle,
including the path)
■ Set log Þle size (controls the size of the selected log Þle)
Changing the print server name or password
If you configured NetWare using the Advanced Configuration Tool
When you change the print server name or password using the Advanced
ConÞguration Tool, the print server name or password is automatically
changed on all Þle servers listed in the conÞguration Þle, if a conÞguration
Þle exists for that printer. There will be a conÞguration Þle if you set up
queues using the Advanced ConÞguration ToolÕs Quick conÞguration
menu.
If an error occurs during the update, the change may not take place on all Þle
servers and the printer will not be updated. In this case, you must correct
the error and change the name or password again.