Tektronix 200 Series - Manual (Page 39)

Novell NetWare Configuration 4
User Manual 4-5
The Advanced ConÞguration Tool creates and maintains a conÞguration Þle
for each printer. ConÞguration Þles contain the names of the queues and Þle
servers the printer will service.
ConÞguration Þles created by the Advanced ConÞguration Tool reside in the
directory SYS:LOGIN\TEK.
ConÞguration Þles are named according to the following syntax:
TK xxxxxx
where xxxxxx represents the last six hexadecimal digits of the Ethernet
address of the printer being conÞgured.
Installing the Advanced ConÞguration Tool
The Advanced ConÞguration Tool (ACT.EXE) is in the ACT-TOOL directory
on the PC version of the printerÕs network utilities diskettes. You can run
the tool from the diskette, but it is recommended that you install it on the
hard disk of a NetWare Þle server or client.
To install the advanced conÞguration tool, copy it from the ACT-TOOL
directory of the diskette to a directory on a NetWare Þle server or client. For
example, if the network utilities diskette is in drive B: and the destination
directory is F:\PUBLIC, type this command:
COPY B:\ACT-TOOL\ACT.EXE F:\PUBLIC