Tektronix 200 Series - Manual (Page 24)

2 Network Printing with Tektronix Color Printers
2-12 Network Utilities for Phaser Color Printers
Resetting your printer using PostScript Þles
Macintosh users
Note Do not use the Restart Printer command in the LaserWriter
UtilityÕs Utilities menu. Follow this procedure to reset the
printer using the LaserWriter Utility to download the
Reset Printer
utility Þle.
1. Select the printer in the Chooser.
2. Locate the LaserWriter Utility on the Macintosh version of the
printerÕs network utilities diskettes.
3. Double-click on the LaserWriter Utility icon.
4. Choose Download PostScript File from the Utilities menu.
5. Select the Reset Printer Þle in the list; then click Open.
6. At the prompt
Save PostScript output as:
you are prompted to name the log Þle that the LaserWriter Utility
creates for PostScript errors. Use either the default name given in
the edit box or type in a new name. Click Save to send the Þle to
the printer.
Note The process of resetting the printer takes a few minutes to
complete. You will receive a message on your screen indicating
that the connection has been interrupted during the reset. The
connection is re-established after the reset, so you can ignore this
message; click the Continue button.
7. If the printer reports no PostScript errors, the LaserWriter Utility
displays a dialog box. Click OK in the box to continue.