Transition Networks SISTM10XX-162-LR - Manual (Page 25)

20
• Hardware version: Display the switch hardware version
• MAC Address: Display the unique hardware address assigned by manufacturer (default)
Switch settings interface
[NOTE] Remember to execute the “Save Configuration” action, otherwise the new configuration will
lose when switch power off.
Port Mirroring
The Port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be
monitored by one specific port. That is, traffic goes in or out monitored ports will be duplicated into
mirror port.
• Port Mirroring Mode: Set mirror mode -- Disable, TX, and Both. The default value is
“Disable”
• Analysis Port: It means mirror port can be used to see all monitor port traffic. User can
connect mirror port to LAN analyzer or Netxray
• Monitor Port: The ports user wants to monitor. All monitor port traffic will be copied to
mirror port. User can select max 7 monitor ports in the switch. User can choose which port
that wants to monitor in only one mirror mode. Mark the State check box to select the port
• And then, click Apply