Transition Networks SISTM10XX-162-LR - Manual (Page 29)

24
802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard which it allows to create a VLAN
across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a “tag”
into the Ethernet frames. Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.
All ports on the switch belong to default VLAN, VID is 1. The default VLAN can’t be deleting. The
maximum VLAN group is up to 64 VLAN groups.
802.1q VLAN interface
Basic VLAN
•
Click Add button
•
Management VLAN ID: It is used for Remote Management Security. In fact, it can
remote management that includes telnet, SNMP, and Web browse the switch, only
when the port of VLAN group ID is equal to the Management VLAN ID. Fill the
specific VLAN ID number in Management VLAN ID column and mark the check box,
and then click Apply button to enable the function. For example: the
management VLAN ID is 101, the VLAN group ID 101 includes the port 1, 2, and 4.
Therefore, only port 1, 2, and 4 can remote management the switch. And, if the port is
in two different VLAN groups and one of VLAN group ID is equal to the assigned
Management VLAN ID, it still has the right to remote management the switch.
• Group Name: Assign a name for the new VLAN
• VLAN ID: Key in a VLAN ID (2~4094). The default is 1