Transition Networks SISTM10XX-162-LR - Manual (Page 31)

26
Click Apply to set the outgoing frames are VLAN-Tagged frames or untagged
Tag: Outgoing frames with VLAN-Tagged
Untag: Outgoing frames without VLAN-Tagged
Port VLAN ID
• Configure port VID settings
• Port VLAN ID: Enter the port VLAN ID
•
And then, click Apply
• To reset back to default value, click Default button
802.1q VLAN – Port VLAN ID interface
[NOTE] Remember to execute the “Save Configuration” action, otherwise the new configuration will
lose when switch power off.