Transition Networks SISTM10XX-162-LR - Manual (Page 6)

1
Introduction
The SISTM10xx-162-LRx Managed Industrial Switch is a cost-effective solution and meets the high
reliability requirements demanded by industrial applications. The switch can be easily managed
through the Web GUI. By using fiber port can extend the connection distance that increases the
network elasticity and performance. It also provides the X-Ring function that can prevent the network
connection failure.
Features
• Conform to IEEE 802.3 10Base-T, 802.3u 100Base-TX/100Base-FX
• 6-port 10/100TX plus 2 100FX port industrial switch
• RJ-45 port support auto MDI/MDI-X function
• Store-and-Forward switching architecture
• Wide-range redundant power design
• DIN rail and wall mount design
• 2K MAC address table
• Web management GUI
• Per port supports 4 priority queues
• Provides Fiber link ability
• IEEE 802.3x flow control support
o
Flow control with full-duplex
o
Back pressure with half-duplex
• Support Class of service
• Support IGMP with Query mode for multi media application
• Supports ingress packet filter and egress rate limit.
• Support SNTP/SMTP
• Port mirror for TX or TX and RX packet.
• Alarm Relay output for system events
• Support X-Ring function
• Power polarity reverse protect
• 1Mbits Embedded memory
• Support Port based VLAN / 802.1 Q Tag VLAN
• IEEE 802.1p class of service and provide port base, Tag base and Type of service priority
method
• Support DHCP client
• SNMP, Web Management, RMON supported
• TFTP firmware update and system configure restore and backup