Transition Networks SISTM10XX-162-LR - Manual (Page 55)

50
Packet filter
4 types of packet filter rule with different packet combination:
All of packet
Broadcast/ multicast/ unknown unicast packet
Broadcast/ multicast packet
Broadcast packet only
MAC address 2K MAC address table
Memory Buffer 1Mbits
LED
Per port: Link/Activity (Green), Full duplex/Collision (Yellow)
Per unit: Power (Green), Power 1 (Green), Power 2 (Green),
Fault (Yellow), Master (Green)
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
Optical cable
ST (Multi-mode): 50/125um or 62.5/125um
ST (Single mode): 9/125um
Available distance: 2KM (Multi-mode) / 30KM (single-mode)
Wavelength: 1310nm (multi-mode/ single mode)
Back-plane 1.6Gbps
Packet throughput
ability
1.19Mpps @64bytes
Power Supply
12 ~48 VDC
Redundant power with polarity reverse protects function and
connective removable terminal block for master and slave power.
Power consumption 7.68 Watts
X-Ring
2 ports for X-Ring to provide redundant backup feature and the
recovery time below 300ms and start by Web interface
management. The ring port can be defined by Web interface.
VLAN
Port based VLAN
IEEE802.1Q Tag VLAN.
Both of port based and Tag based VLAN group up to 64 VLANs.
Class of service
IEEE802.1p class of service
Per port provides 4 priority queues.
Quality of service
The quality of service determined by port, Tag and Ipv4 Type of
service.