Uniden WDECT 2345+1 - Manual (Page 20)

! For Global
Setup, Answ.
Setup, and
System Reset-
Deregister
Handset, when
setting options
from the
handset, make
sure the line is
not in use and
the handsets are
within range of
the base.
Main Menu Options
Your phone has seven main menu options:
You can change and settings from the
base or from any handset.
and are only available
from a handset. is only available from the base.
The default settings set at the factory match the features that most people use. You may not
need to change them. However, there are a number of options you must set and entries you
must make in memory to take full advantage of all the phone features.
The table below lists the default settings.
DirectLink Mode, Room/ Baby Monitor,
Handset Setup, Base Setup, Answ. Setup, System Reset (Handset only), Handset
Registration(Base only) and Global Setup .
Room/ Baby Monitor, Answ. Setup , Global Setup
DirectLink Mode, Handset Setup System Reset-Replacing Base
Base Setup
Default Settings
Function Handset Base Function Handset Base
Ringer Tone Flicker Ring Time 9
Distinctive Ring On Recording Time one minute
Auto Talk On Message Alert Off
Anykey Answer On Name Tagging On
Banner Call Screen On
Insert Zero Answer Setup On
Contrast level 5 Day & Time SUN 12: 00 AM
Key Touch Tone On CIDCW Off
Record Greeting - - -
Select Greeting Dial Mode Tone
Security Code 80
Pre- record OGM
-(AUS)/On(NZ) Off(AUS)/On(NZ)
[19]