Uniden WDECT 2345+1 - Manual (Page 73)

MUL
TI
-HANDSET
FEA
TURES
!
If the party is busy or
out of range, the
phone returns to
standby mode.
If you receive an
outside/intercom call
or page while
selecting the other
handset (or the
base), the
operation will be
canceled.
If you do not select a
handset or the base
within thirty seconds,
the operation will be
canceled.
If the party does not
answer within one
minute,
the operation
is canceled.
If the party is out of
range, Unavailable
appears in the
display, and the
operation will be
canceled.
If all handsets and
the base are paged,
only the first party to
answer the page will
connect.
!
!
!
!
!
Intercom
The intercom feature lets you communicate with another handset or the base
without using the phone line.
1) With the phone in standby mode, press
2) Use to select the base or
the handset you want to talk with, and then
press
If you select , all other handsets and the
base will be paged. An intercom tone sounds.
To cancel intercom, Press
1) With the phone in standby mode, press on the base.
2) Use to select the handset you want to talk with, and then
press the soft key. If you select , all other handsets will be paged. An
intercom tone sounds.
To cancel intercom, press or the soft key.
When the intercom page tone sounds, the display will show the ID of the handset
or base that is paging.
Making an Intercom Page
From a handset
.
From the base
OK
CANCEL
Answering an Intercom Page
hold/transfer/int'com
volume up/down
select/ .
end.
transfer/int'com/hold
volume up/down
transfer/int'com/hold
All
All
To Intercom
Handset #2
Handset #3
[72]