Uniden WDECT 2345+1 - Manual (Page 43)

5) Press (or the soft key) to store the
name; appears.
6) Use the number keypad, to
enter the phone number (up to 20 digits). To
insert a 2-second pause in the dialing sequence,
press If you make an error, use
(or the soft key on the base)
to erase the incorrect digits. When you are
finished, press (or the soft key) to
store the number.
7) appears. Press
to move the pointer to one of the
Distinctive Ring options and then press
(or the soft key). If you choose not to store a
Distinctive Ring, simply select the
option.
8) appears. Press
To move the pointer to select the
(10 locations: SPD1-
SPD0). If you choose not to store the
name/number as a Speed Dial, simply choose the
option.
OK
DELETE
OK
OK
select/
pause/redial.
menu/del
select/
/volume
up/down
select/
/volume
up/down.
Store/Edit No
Distinctive Ring
"No Selectn"
Speed Dial
Speed dial location
"No Selectn"
or /tone/ #/
PHONEBOOK
!
!
!
Selecting a
phonebook
location where a
number is already
stored overwrites
the old number.
The new number
will be stored in the
phonebook
location.
When the memory
is full, you will hear
a beep and
appears. You
cannot store
names and
numbers.
The pause key
counts as one
digit. Pressing
more than once
increases the
length of the pause
between numbers.
Each pause
represents a 2
second delay.
Memory Full
pause/redial
Store/Edit No .
8009675543
Distinctive Ring
No Selection
Flicker
Speed Dial
No Selectn
SPD1:<Empty>
[42]