Uniden WDECT 2345+1 - Manual (Page 58)

!
Through this
chapter, we use
Handset LCD
image to describe
steps.
Each time you press the soft key, the phone switches the outgoing
message between the prerecorded and the personal outgoing message.
To delete the personal greeting, press the soft key.
You need to select a two-digit security code in order to play your messages from a
remote location. When you try to access your messages from another phone, you
must enter your security code.
1) Press (or the soft key on
the base). Select the Answ. Setup menu, and
then the Security Code submenu.
2) Enter a two-digit security code (01-99) using
the number keypad ( - ).
3) Press (or the soft key on the base). You will hear a
confirmation tone.
Ring Time allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to
answer after four, six or nine rings. If you enable the Toll Saver (TS), the answering
system picks up after two rings if you have new messages, and after four rings if
there are none.
1) Press (or the soft key).
Select the Answ. Setup menu, and then the
Ring Time submenu.
CHANGE
DELETE
MENU
OK
MENU
Setting a Security Code
Setting the Ring Time
menu/del
select/
menu/del
0 9
Security Code
80
Ring Time
Toll Saver
4 Times
[57]