Uniden WDECT 2345+1 - Manual (Page 36)

Muting the Ringer
Do Not Disturb (DND)
Temporarily Muting the Ringer
The feature allows you to mute the ringer of the base and
any registered handsets at the same time. The phone must be in standby mode.
Press and hold on the base. You will hear a confirmation tone, and
the LED illuminates. To cancel the feature, press again.
You can also mute the ringer tone while the phone is ringing by pressing
on the base.
To mute the ringer tone temporarily for each handset or the base, while the phone
is ringing, press on the handset or the soft key on the base. The mute
will last for the current incoming call only. The ringer tone will return to the previous
setting starting with the next incoming call.
The audio tone feature provides three different tone levels. If you have difficulty
hearing a caller:
-Press the soft key. Use to select
Audio Tone Setup, and press the soft key. Each press of the soft key
will change the audio tone level. The default setting, Natural Tone, is recommended
for hearing aid users.
do not disturb
do not disturb
do not disturb
do not
disturb
end
/volume up/down
(DND)
DND DND
MUTE
Audio Tones (Base Only)
From the base MENU
OK CHANGE
! You can only mute
the handset ringer
if the handset is
off the cradle
when the phone
starts ringing.
[35]