Uniden WDECT 2345+1 - Manual (Page 44)

9) Press (or the soft key).
You will hear a confirmation tone, and
appears in the display.
Messages shown in the Caller ID list (see page 51) can be stored in the
phonebook. The phone number and name of the party on the Caller ID list can be
stored in memory.
1) When the phone is in standby mode, select the Caller ID message to be stored.
2) Press (or the soft key). appears.
If the Caller ID message is already stored in memory, you will hear three beeps
and This data is already stored!! appears. The number will not be stored.
3) To complete the setting, follow the steps 4-9 in “Storing and Editing Phone
Numbers, Names, Distinctive Rings and Speed Dial” on page 41.
1) With the phone in standby mode, press
2) Press repeatedly to display the number to be stored.
3) Press (or the soft key). appears. If the
number is already stored in memory, you will hear three beeps and
appears. The number will not be stored.
4) To complete the setting, follow the steps 4-9 in “Storing and Editing Phone
Numbers, Names, Distinctive Rings and Speed Dial” on page 41.
select/
select/
pause/redial.
pause/redial
select/
OK
STORE
STORE
Done!
Store/Edit Name
Store/Edit Name
This data
is already stored!!
Storing Caller ID Messages in the Phonebook
Storing a Redial Record
!
!
!
If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is
stored.
If the Caller ID
message was
received as a
private/unknown
number or the
message does not
have the number,
you cannot store the
message in the
phonebook. If it was
received as
private/unknown
name, the message
will be stored as
<No Name>.
Even if all 100
memory locations
are full, the
message will be
stored in the
phonebook.
However, the oldest
Caller ID message
will be erased from
the Caller ID list.
Movies
800 730 3456
Beethoven9/SPD1
[43]