Uniden WDECT 2345+1 - Manual (Page 30)

Using Your Phone
Power Failure Operation
Because the phone is a corded/cordless combination phone, it can still perform
several of its functions during a power failure. The following features will function
even during a power failure:
--Making, receiving, and redialing calls with the corded base handset
--Adjusting the volume on the main base
--Call waiting/flash feature on the main base
--DirectLink mode
All other features are disabled during a power failure.
In the event of a power failure occuring, Corded Handset on base requires 2
seconds to become operational after it is picked up.
1)Remove the handset from the cradle.
2)Press
3)Listen for the dial tone.
4)Dial the number.
OR
Making and Receiving Calls
Making a call
From the handset
talk/flash
[29]
!
!
It is important the
procedure on
page 11 is done
to confirm Power
Failure
Operation.
"Test Telephone
Line without
Power"
If the line is in
use by another
handset(s) or the
base,”
"appears in
the display of all
registered
handset's or the
base's that are
not in use.
Line In
Use