Uniden WDECT 2345+1 - Manual (Page 67)

1) After the answering system answers, the base speaker will let you hear the calls
as the machine records the message. To adjust the volume, press
If you set the answering system to off, you cannot screen a call.
2) To answer the call, pick up the corded handset or press on the base.
To mute the Call Screen, press the soft key or . To cancel muting, press
the soft key.
Press when the system is answering. To answer the call, press
or . The answering system will disconnect automatically.
You can check, play, or delete messages when you are away from home or from
another room using a handset. Additionally, you can record, select, or delete your
own greeting message.
• If you press before the answering system answers, the phone will return
to standby.
• If the answering system does not answer within 6 seconds, you hear a beep
and the phone will return to standby.
• When you receive a call, the remote operation is cancelled.
• You can change the handset volume during a remote operation.
• If you have new messages and old messages, after you have reviewed your
new messages, you can play your old messages by pressing /2 again.
• To switch to normal conversation, press on the handset.
volume
up/ down
select/ talk/flash
end
.
MUTE
SCREEN
From the handset
Remote Operation
THE
INTEGRA
TED
ANSWERING
DEVICE !
!
!
If you press
while another
handset is
screening a call,
you will hear a
beep and you
can not screen a
call.
The timestamp
will not be heard
until you have
set the time.
When the
answering
system is full,
appears on
the base. You
should delete
some messages
so that the
system can
record new
messages.
(Refer to
"Deleting a
Message" on
page 64.)
Select/
FULL
[66]