Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 152)

WLS 8400 Product Reference Guide 8-6
Symbology Default Parameters
Table 8-1 lists the defaults for all symbologies parameters. To change any option, scan the
appropriate bar code(s) provided in the Symbologies Parameters section beginning on 8-10 .
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Table 8-1. Symbology Default Table
Parameter Default Page Number
UPC/EAN
UPC-A Enable 8-10
UPC-E Enable 8-10
UPC-E1 Disable 8-11
EAN-13/JAN 13 Enable 8-11
EAN-8/JAN 8 Enable 8-12
Bookland EAN Disable 8-12
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) Ignore Supplementals 8-14
UPC/EAN/JAN Supplemental Redundancy 14 8-15
Transmit UPC-A Check Digit Enable 8-15
Transmit UPC-E Check Digit Enable 8-16
Transmit UPC-E1 Check Digit Enable 8-16
UPC-A Preamble System Character 8-17
UPC-E Preamble System Character 8-18
UPC-E1 Preamble System Character 8-19
Convert UPC-E to A Disable 8-20