Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 18)

WLS 8400 Product Reference Guide xvi
• Appendix D, Numeric Bar Codes includes the numeric bar codes to scan for
parameters requiring specific numeric values.
Notational Conventions
The following conventions are used in this document:
• Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential.
• Sequential lists (e.g., those that describe step-by-step procedures) appear as
numbered lists.
• Throughout the programming bar code menus, asterisks (*) are used to denote
default parameter settings.
Related Publications
The WLS 8400 Quick Start Guide provides general information to help the user get started
with the scanner. It includes basic set-up and operation instructions.
For the latest versions of the WLS 8400 Quick Start Guide and the WLS 8400 Product
Reference Guide go to:
http://www.waspbarcode.com .
Service Information
If there is a problem with the equipment, contact the local Wasp Support . See page xvii for
contact information. Before calling, have the model number, serial number, and several of
the bar code symbols at hand.
Call Wasp Support from a phone near the scanning equipment so that the service person
can try to talk through the problem. If the equipment is found to be working properly and
the problem is symbol readability, Wasp Support will request samples of the bar codes for
analysis at our plant.
*
Baud Rate 9600 Feature/Option * Indicates Default