Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 221)

Advanced Data Formatting 10-5
Rule 1: The Code 128 Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 10-9 High High
2 Code 128 10-13 High High
3 Send next 5 characters 10-29 High High
4 Send <CTRL M> 10-56 High High
5 Send next 5 characters 10-29 High High
6 Send <CTRL P> 10-57 High High
7 Send next 2 characters 10-28 High High
8 Send <CTRL D> 10-55 High High
9 Save Rule 10-9 High Low High Low
Rule 2: The UPC Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 10-9 High High
2 UPC/EAN 10-15 High High
3 Send all remaining data 10-28 High High
4 Send <CTRL M> 10-56 High High
5 Save Rule 10-9 High Low High Low
In case of errors while entering this rule, scan the Quit Entering Rules bar code on page
10-10. If the rule is already saved, scan the Erase Previously Saved Rule bar code on page
10-10.
Alternate Rule Sets
ADF rules may be grouped into one of four alternate sets which can be turned on and off
when needed. This is useful to format the same message in different ways. For example, a
Code 128 bar code contains the following information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500