Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 349)

Standard Default Parameters A-9
Miscellaneous Scanner Options
Transmit Code ID Character None 9-5
Scan Angle Normal Angle 9-6
Prefix Value 7013 <CR><LF> 9-6
Suffix Value 7013 <CR><LF> 9-6
Scan Data Transmission Format Data As Is 9-7
FN1 Substitution Values Set FN1 Substitution
Value 9-9
Transmit “No Read” Message Disable No Read 9-9
Table A-1. Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.