Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 210)

WLS 8400 Product Reference Guide 9-4
Scanning Sequence Examples
In most cases, only one bar code needs to be scanned to set a specific parameter value.
Parameters, such as Prefix Value, require that several bar codes be scanned in the proper
sequence. See each individual parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, if an error is made during a scanning sequence, re-scan the
correct parameter.
Miscellaneous Default Parameters
Table 9-1 lists the defaults for miscellaneous scanner options parameters. To change any
option, scan the appropriate bar code(s) provided in the Miscellaneous Scanner Parameters
section beginning on page
9-5 .
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Table 9-1. Miscellaneous Scanner Options Default Table
Parameter Default Page Number
Miscellaneous Scanner Options
Transmit Code ID Character None 9-5
Scan Angle Normal Angle 9-6
Prefix Value 7013 <CR><LF> 9-6
Suffix Value 7013 <CR><LF> 9-6
Scan Data Transmission Format Data As Is 9-7
FN1 Substitution Values Set FN1 Substitution
Value 9-9
Transmit “No Read” Message Disable No Read 9-9