Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 52)

WLS 8400 Product Reference Guide 4-4
User Preferences Default Parameters
Table 4-1 lists the defaults for user preferences parameters. To change any option, scan the
appropriate bar code(s) provided in the User Preferences section beginning on page 4-5 .
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Table 4-1. User Preferences Default Table
Parameter Default Page Number
User Preferences
Set Default Parameter All Defaults 4-5
Beeper Tone High 4-5
Beeper Volume High 4-6
Power Mode Continuous On 4-7
Laser On Time 3.0 sec 4-7
Beep After Good Decode Enable 4-8
Trigger Mode Level 4-8
Aim Duration 0.0 sec 4-10