Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 194)

WLS 8400 Product Reference Guide 8-48
Set Lengths for Codabar (continued)
Length Within Range - This option allows the scanner to decode a Codabar symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
D-1 in Chapter D, Numeric Bar Codes. For example, to decode
Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length
Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by
a leading zero). In case of an error, or to change the selection, scan Cancel on page
D-7 .
Codabar - Length Within Range
Any Length - This option allows the scanner to decode Codabar symbols containing any
number of characters within the scanner capability.
Codabar - Any Length