Yamaha DRX-2 - Manual (Page 30)

25 Installing your DVD recorder
7 Select “Stereo” or “SAP” with w or v and confirm with ENTER/OK.
8
To end, press SYSTEM-MENU.
If you intend to use the VCR Plus+
®
programming system, you must first assign Guide
channel numbers to the TV channels.
1 Press SYSTEM-MENU on the remote control. The menu bar will appear.
2
Select “ ” using t or u.
3 Select line “Installation” using w or v and confirm with u.
4
Select the line “VCR Plus+ Ch.” using w or v and confirm with u.
5 Use w or v to select the Guide channel number you want to assign to a TV chan-
nel.
6 Use t or u, or use the number buttons 0..9 to select the TV channel correspond-
ing to this Guide channel number. An overview of guide numbers/TV channels can
be found in your daily newspaper or in your TV listings.
7
Confirm the allocation with ENTER/OK.
8 To end, press SYSTEM-MENU.
Assigning the VCR Plus+
®
Guide
channel numbers
Installation
VCR Plus+ Ch.
VCR Plus+ Ch. Channel
... ---
001 ---
002 ---
003 ---
004 ---
005 ---
...
To exit press
SYSTEM MENU