Yamaha DRX-2 - Manual (Page 46)

41 Manual recording
1 Switch on the TV set and select the programme number for the DVD recorder.
2
Insert a disc on which the recording is to be made. This disc is then checked for
content and system. “READING” will appear on the display.
3 If necessary, use the MONITOR button on the remote control to switch to the
internal tuner in the DVD recorder.
4 Use CH+ or CH- to select the programme number (station name) you want to
record. This will appear on the display:
5
To start recording, press REC S on the remote control or REC on the DVD
recorder.
If you want to start the recording at the end of the existing recordings, hold down
the REC S button until the message “SAFE REC” appears on the display.
For DVD+R discs each new recording is always added at the end of all previous
recordings as existing recordings cannot be overwritten.
This will, for example, appear in the display:
Recording without automatic
switch-off
Problem
✘ Index display
✓ A DVD+RW disc has been inserted that already contains recordings. Use the v
or w button to select the point where the recording is to start.
✘ The message “EMPTYDISC” appears in the display
✓ The disc inserted is a blank DVD disc.
✘ A dialog box appears asking you whether you want to delete the
contents or eject the disc
✓ The disc inserted is a DVD+RW but its contents are not DVD video-compatible
(e.g. a data disc). Recordings on this disc can only be made if the entire disc is
first deleted with the REC S button.
✘ The message “Too many titles” appears on the screen if a record-
ing is to be made
✓ A disc may contain a maximum of 48 titles (including blank titles). Delete titles
or change the disc.
Tip
Programme number of the external inputs:
“EXT2” SVHS jack (Y/C) S-VIDEO IN Video jack (CVBS) Video in, Audio jack
IN L AUDIO R for SVHS-jack and Video jack.
Switching between jack S-VIDEO IN and Video in is done automatically.
In case both jacks are occupied, the signal at jack S-VIDEO IN is given
priority.
“EXT1” Component Video jacks on the back IN COMPONENT VIDEO, Audio
jacks IN AUDIO LR for Component Video
“CAM1” SVHS-/Audio front jacks S-VIDEO / left AUDIO right
“CAM1” Video/Audio front jacks A/V VIDEO / left AUDIO right Switching
between jack S-VIDEO and VIDEO is done automatically. In case both
jacks are occupied, the signal at jack S-VIDEO is given priority
“CAM2” Digital video (i.Link) front jack DV IN