Yamaha DRX-2 - Manual (Page 73)

Appendix 68
English
Appendix
Your DVD recorder remote control can transmit several commands to TV sets of dif-
ferent brands.
The following keys will operate the TV set:
- VOL +
increase TV volume
- VOL - decrease TV volume
- MUTE mute TV
Some other keys normally operate the DVD recorder, but will operate the TV set when
you keep TV SHIFT pressed:
- CH +
next TV programme number
- CH - previous TV programme number
- 0..9 choose TV channel
- B/I switch TV set to standby
If your TV set does not respond to the remote control, you can re-programme your
remote control. Below you will find a list of all available remote control codes for vari-
ous TV brands. The following procedure re-programmes your remote control:
1 Look up the set-up code for your TV set in the code list in the following page.
2 Press and hold the t and u simultaneously for at least 3 seconds.
3
Release both keys.
4 Enter, within 30 seconds, the correct four-digit code with the digit keys 0..9.
5
If the selected code does not work with your TV set, or if the brand of your TV
set is not in the list, try out the codes one after the other.
Using DRX-2 remote control for
your TV set