Yamaha DRX-2 - Manual (Page 59)

Programming a recording (TIMER) 54
English
Thanks to this programming system, you no longer need to tediously enter the date, TV
channel, start and end times. All the information needed for programming is contained
in the PlusCode programming number. This 8-digit PlusCode number is found in most
TV listings for magazines.
1
Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or
4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER on the remote control.
The programming method selected last is marked.
3 Select line “VCR Plus+ system” using w or v and confirm with u.
4
Enter the entire PlusCode number. This number is up to 9 digits long and can be
found next to the start time of the TV program in your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode number.
If you make a mistake, you can clear the entry with CLEAR.
5 Confirm with ENTER/OK.
6 The decoded data appears after confirmation. You can go back and change the
data. Select the appropriate input field with u or t. If required, make changes
using w, v or the number buttons 0..9.
Programming recordings with the
VCR Plus+
® System
Tip
Selecting daily/weekly recordings
Using SELECT, select from the following options:
“Mo-Fr”: Repeated daily recordings (Monday to Friday).
“Weekly”: Repeated weekly recordings (every week on the same day).
Problem
✘ The following message appears on the screen: “Please enter chan-
nel number”
✓ The channel number of the TV channel has not yet been assigned to the Plus-
Code number. Using u , t or the number buttons 0..9 on the remote control,
select the corresponding channel number (name) of the TV channel and confirm
with ENTER/OK.
✘ The following message appears on the screen: “PlusCode number
wrong”
✓ The entered PlusCode number is incorrect. Repeat your entry or cancel using
the SYSTEM-MENU button.
✓ Check the time/date (see “Setting the time & date” in “Installing your DVD
recorder”).
✘ The following message appears on the screen: “Date does not
match Mon-Fri”
✓ A daily recording was entered for the wrong day. Daily programming can only be
used for recordings to be made from Monday to Friday.
Timer
Mo-Fr/Weekly
Press SELECT To store
Press OK
VCR Plus+system
PlusCode number
- - - - - - - - -
Timer
To store
Press OK
VCR Plus+system
Rec
Date Ch. Start End Mode
01/22 001 08:30AM 10:00PM M1