If you selected “auto” in step 6, If you selected “step” in step 6, If you selected “reload” in step 6 – Yamaha htr-5890 User Manual

Page 32: Result:wiring, Result:equalizi, Result:distance1, Result:level 1, Result:size 1

Advertising
background image

28

AUTO SETUP

7

Press

n

to select START PUSH

i

, then press

h

.

Loud test tones will be output from each speaker and
WAIT appears during the auto setup procedure.

If “E-10:OTHER ERROR” appears during testing, restart the
procedure from step 3.

If you selected “AUTO” in step 6

The RESULT display appears for a few seconds after each
check, then settings of the next item will start. The
RESULT:EXIT display appears after all items are set.

y

You can display each result by pressing k once and pressing h
repeatedly before exiting. Pressing n returns to the
RESULT:EXIT display.

8

To apply the changes, press

l

/

h

to select

SET, then press

n

to exit.

To cancel the auto setup procedure, press

l

/

h

to select CANCEL, then press

n

to exit.

If you selected “STEP” in step 6

The RESULT display appears after each check.

8

Press

l

/

h

to display RESULT:EXIT, then

press

l

/

h

to select:

NEXT

Then press n to proceed and check the next item.

EXIT

Then press n to exit the auto setup.

y

• Press k / n repeatedly to move between each display.
• If you are not satisfied with the result or want to manually

adjust each setup parameter, use the manual setup parameters
(see page 55).

• If you change speakers, speaker positions, or the layout of your

listening environment, perform AUTO SETUP again to re-
calibrate your system.

• In the DISTANCE results, the distance displayed may be longer

than the actual distance depending on the characteristics of your
subwoofer.

• In the EQUALIZING results, different values may be set for the

same band to provide finer adjustments.

If you selected “RELOAD” in step 6

The RESULT:EXIT display appears.

y

You can display each result by pressing k once and pressing h
repeatedly before exiting. Pressing n returns to the
RESULT:EXIT display.

8

Press

l

/

h

to select “SET”, then press

n

to

exit.

Note

/

: Up/Down

p

p

</> : Back/Next

RESULT:WIRING

FRONT L;;;;;;;OK

/

: Up/Down

p

p

EQ;;;;;FRONT L

63Hz;;;-2.0dB

125Hz;;;-5.0dB

500Hz;;;;;;0dB

630Hz;;;;;;0dB

1.0kHz;;;;;;0dB

3.15kHz;;;+3.0dB

10.0kHz;;;+1.0dB

RESULT:EQUALIZI.

/

: Up/Down

p

p

</> : Back/Next

. FRONT L;;;;3.20m

CENTER;;;;;3.30m

FRONT R;;;;2.90m

PRES L;;;;;1.70m

PRES R;;;;;1.50m

RESULT:DISTANCE1

/

: Up/Down

p

p

</> : Back/Next

. FRONT L;;;+5.0dB

CENTER;;;;-4.5dB

FRONT R;;;+5.5dB

PRESENCE;;-3.0dB

RESULT:LEVEL 1

/

: Up/Down

p

p

</> : Back/Next

FRONT L;;;;;;LRG

RESULT:SIZE 1

Notes

01EN00_HTR5890U.book Page 28 Thursday, December 23, 2004 12:39 PM

Advertising