Yamaha htr-5890 - Manual (Page 8)

CONTROLS AND FUNCTIONS
4
1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When
you turn on this unit, you will hear a click and there will
be a 6 to 7-second delay before this unit can reproduce
sound.
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote control.
2 PURE DIRECT
Turns on or off the PURE DIRECT mode. Lights up when
turned on (see page 37).
3 Remote control sensor
Receives signals from the remote control.
4 Front panel display
Shows information about the operational status of this
unit.
5 PRESET/TUNING EDIT
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and tuning.
6 FM/AM
Switches the reception band between FM and AM.
7 A/B/C/D/E
Selects one of the 5 preset station groups (A to E).
8 PRESET/TUNING l / h
Selects preset station number 1 through 8 when a colon (:)
is displayed next to the band indication in the front panel
display.
Selects the tuning frequency when the colon (:) is not
displayed.
9 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
0 TUNING MODE (AUTO/MAN’L MONO)
Switches the tuning mode between automatic (AUTO
indicator on) and manual (AUTO indicator off).
A VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
B OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 26).
CONTROLS AND FUNCTIONS
Front panel
PURE DIRECT
PRESET/TUNING
EDIT
FM/AM A/B/C/D/E PRESET/TUNING
INPUT MODE TONE CONTROL MULTI CH
INPUT
STRAIGHT
EFFECT
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
VOLUME
PROGRAM INPUT
STANDBY
/ON
OPTIMIZER
MIC
PHONES
SILENT CINEMA
SPEAKERS
A B
OPTICAL R AUDIO L VIDEO S VIDEO
VIDEO AUX
1
B C D E F G H I J K
2 3 4 5 6 7 8 9 0 A
Note
01EN00_HTR5890U.book Page 4 Thursday, December 23, 2004 12:39 PM