Yamaha htr-5890 - Manual (Page 35)

BASIC SETUP
31
PRE
P
ARA
T
ION
The basic system parameters are set automatically when
you run auto setup (page 26). Basic setup is useful if you
want to quickly setup your speakers or to manually adjust
some of the items set in auto setup.
y
If you wish to configure the unit manually using more precise
adjustments, use the detailed parameters in SOUND MENU
(page 55) instead of BASIC MENU.
Altering any parameters in BASIC MENU will reset all
parameters in SOUND MENU.
1
Set AMP/SOURCE/TV to AMP, then press
SET MENU to enter the SET MENU.
2
Press k / n repeatedly to select MANUAL
SETUP, then press l / h to enter the
selected category.
If k is pressed when AUTO SETUP is selected, or if
n
is pressed when MANUAL SETUP is selected,
SET MENU will be closed. Press SET MENU to
open SET MENU again.
3
Press l / h to enter BASIC MENU.
4
When ROOM is selected, press l / h to
change the setting.
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:
S (small) 16 x 13 ft, 200 ft 2 (4.8 x 4.0 m, 20 m 2 )
M (medium) 20 x 16 ft, 300 ft 2 (6.3 x 5.0 m, 30 m 2 )
L (large) 26 x 19 ft, 450 ft 2 (7.9 x 5.8 m, 45 m 2 )
5
Press n to select SWFR, then press l / h to
select:
YES If you have a subwoofer in your system.
NONE If you do not have a subwoofer in your system.
6
Press n to select PRESENCE, then press
l / h to select:
YES If you have presence speakers in your system.
NONE If you do not have presence speakers in your
system.
BASIC SETUP
Note
Using BASIC MENU
SET MENU
MENU
EFFECT
TEST
RETURN
ON SCREEN
DISPLAY
STRAIGHT
NIGHT
AUDIO
PURE DIRECT
ENTER
LEVEL
TITLE
A / B / C / D / E
SELECT
VOL
+
–
CH
+
–
TV VOL
TV MUTE TV INPUT MUTE
+
–
AMP
SOURCE
TV
2-9
1
SET MENU
MENU
AMP
SOURCE
TV
then
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
: Up/Down
p
/p
: Enter < / >
ENTER ENTER
then
1 BASIC MENU 1/2
. ROOM : S [M L
SWFR : [YES NONE
PRESENCE;;;;NONE
SPEAKERS;;;;7spk
01EN00_HTR5890U.book Page 31 Thursday, December 23, 2004 12:39 PM