Yamaha htr-5890 - Manual (Page 70)

66
REMOTE CONTROL FEATURES
■ Controlling optional components
(OPTN area)
OPTN is an additional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the OPTN control area, press n repeatedly until
OPTN appears in the display window.
• You cannot set a remote control code for this area. See page 68
to program buttons operated within this component control
area.
• The OPTN area cannot be used when AMP1Z or NO is selected
in the amplifier library (see page 67).
You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote Control Code Default Settings
* Additional YAMAHA codes available are given in
parentheses.
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above. In
this case, try setting another YAMAHA remote control code.
1
Set AMP/SOURCE/TV to SOURCE.
Notes
Setting remote control codes
Input area
Library
(Component
category)
Default YAMAHA
code *
A LD 2200
B TAPE 2700, (2701)
PHONO TV –
TUNER TUNER
2600, (0203, 1203,
1358, 2601)
CD CD 2300, (2301)
MULTI CH
INPUT
DVD
2102, (0517, 0566,
0572, 2100, 2101)
V-AUX VCR –
CBL/SAT CABLE –
MD/TAPE MD 2500, (2501, 2502)
CD-R CD-R 2400
DTV TV –
VCR 1 VCR –
DVR/VCR2 DVR 2807
DVD DVD
2102, (0517, 0566,
0572, 2100, 2101)
Note
AMP
SOURCE
TV
01EN00_HTR5890U.book Page 66 Thursday, December 23, 2004 12:39 PM