Yamaha htr-5890 - Manual (Page 54)

ADVANCED OPERATIONS
50
You can display this unit’s operating information on a
video monitor. If you display the SET MENU and sound
field program parameter settings on a monitor, it is much
easier to see the available options and parameters than it is
by reading this information in the front panel display.
1
Turn on the video monitor connected to this
unit.
2
Press ON SCREEN repeatedly to change the
OSD mode.
The OSD mode changes in the
following order: full display, short
display, and display off.
Full display
Always shows the sound field program parameter
settings as well as the contents of the front panel
display.
Short display
Briefly shows the contents of the front panel display
at the bottom of the screen each time you operate this
unit.
Display off
Only operations performed using ON SCREEN are
displayed. The OSD is displayed when using SET
MENU or the test tone feature, even if the OSD mode
is set to “Display off”.
• The OSD signal is not output to the REC OUT jack, and will
not be recorded.
• When the component video signals are input, short display is
not output to the COMPONENT VIDEO MONITOR OUT
jacks.
• You can set the OSD to turn on (gray background) or off when a
video source is not being reproduced (or the source component
is turned off) by using DISPLAY SET (see page 62).
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLETS.
■ Setting the sleep timer
1
Select a source and start playback on the
source component.
2
Press SLEEP repeatedly to
set the amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes
while switching the amount of time for
the sleep timer.
The SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound
field program.
ADVANCED OPERATIONS
Selecting the OSD mode
Notes
ON SCREEN
DISPLAY
P08 Sci-Fi
. DSP LEVEL;;;;0dB
P.INIT DLY;;16ms
P.ROOM SIZE;;1.0
S.INIT DLY;;20ms
S.ROOM SIZE;;1.0
P08 MOVIE THEATER
Sci-Fi
Full display Short display
Using the sleep timer
TRANSMIT
SELECT
DTV DVR/VCR2 VCR 1 DVD
V-AUX CBL/SAT MD/TAPE CD-R
PHONO TUNER CD MULTI CH IN
POWER POWER POWER SYSTEM STANDBY
AV TV
SLEEP INPUT MODE A B 2
SLEEP
SLEEP 120 min. SLEEP 90 min.
SLEEP 60 min. SLEEP 30 min. SLEEP OFF
S L E E P 1 2 0 m i n
V–AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R CD TUNER PHONO
SLEEP
VOLUME
A
SP
L L R
dB
C O N C E R T H A L L
V–AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD–R CD TUNER PHONO
SLEEP
VOLUME
A SP
L L R
dB
01EN00_HTR5890U.book Page 50 Thursday, December 23, 2004 12:39 PM