Clearing individual functions, Clearing a learned function, Press clear to exit from the clearing mode – Yamaha htr-5890 User Manual
Page 78: Set amp/source/tv to source
74
REMOTE CONTROL FEATURES
5
Press CLEAR to exit from the clearing mode.
• “C:NG” appears in the display window if clearing was
unsuccessful. In this case, start over from step 3.
• “ERROR” appears in the display window if you press a button
not indicated in the respective step, or if you press more than
one button simultaneously.
■
Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1
Set AMP/SOURCE/TV to SOURCE.
2
Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
3
Press LEARN using a ballpoint pen or similar
object.
“LEARN” and the selected component name (ex.
“DVD”) appear alternately in the display window.
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, press LEARN again.
Notes
CLEAR
Clearing individual functions
Notes
AMP
SOURCE
TV
DTV
DVR/VCR2
VCR 1
DVD
V-AUX
CBL/SAT
MD/TAPE
CD-R
PHONO
TUNER
CD
MULTI CH IN
SLEEP
INPUT MODE
A
B
LEARN
01EN00_HTR5890U.book Page 74 Thursday, December 23, 2004 12:39 PM