Zebra Technologies XiII-Series - Manual (Page 63)

Routine Care and Adjustment
Cleaning
Table 5 provides a brief cleaning schedule. Specific cleaning procedures
are provided on the following pages. A Preventive Maintenance Kit
(part # 01429) is available from Zebra. Kit items are also sold separately
by the part numbers shown.
Preventive Maintenance Kit
Solvent (Alcohol), 4 oz. bottle (part # 01426)
Applicators, bag of 100 (part # 01427)
Table 5. Cleaning Schedule
Area Method Interval
Printhead Solvent*
Direct Thermal Print Mode:
After every roll of media
(or 500 ft. of fanfold media)
Thermal Transfer Print Mode:
After every roll of ribbon.
Platen Roller Solvent*
Transmissive Media Sensor Air blow
Reflective (Black-Mark)
Media Sensor
Solvent*
Media Path Solvent*
Ribbon Sensor Air blow
Peel/Tear Bar Solvent* As needed.
Label Available Sensor Air blow Monthly.
Cutter Module Solvent* As needed.
* Zebra recommends using solvent containing 70% alcohol.
CAUTION: Use only the cleaning agents indicated. Zebra
Technologies Corporation will not be responsible
for any other fluids being used on this printer.
Zebra XiII-Series User’s Guide 51
63
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:36:14 1998
Color profile: Disabled
Composite Default screen