Zebra Technologies XiII-Series - Manual (Page 95)

Printer Fonts
Standard Printer Fonts
For more information on fonts, refer to the ZPL II Programming Guide.
n Bit-mapped fonts A, B, C, D, E, F, G, H, and GS are expandable up to
10 times, height- and width-independent. However, fonts E and H
(OCR-B and OCR-A) are not considered in-spec when expanded.
n The scalable (smooth) font (CG Triumvirate™ Bold Condensed) is
expandable on a dot-by-dot basis, height- and width-independent, while
maintaining smooth edges, to a maximum of 1500 x 1500 dots.
n IBM Code Page 850 international characters are available in fonts A, B,
C, D, E, F, G, and Ø through software control.
Table 7. Eight Dots/mm Printhead
Standard
Fonts
Dot Matrix Type Minimum Character Size
Height x Width
(in dots)
Inter-character Gap
U = Uppercase
L = Lowercase
D = Descenders
Height x Width Character Density
A 9 x 5 1 U-L-D
0.044" x 0.029"
1.13 mm x 0.75 mm
33.90 Char/inch
1.33 Char/mm
B 11 x 7 2 U
0.054" x 0.044"
1.38 mm x 1.13 mm
22.60 Char/inch
0.89 Char/mm
C, D 18 x 10 2 U-L-D
0.088" x 0.059"
2.25 mm x 1.50 mm
16.95 Char/inch
0.67 Char/mm
E 28 x 15 5 OCR-B
0.138" x 0.098"
3.50 mm x 2.50 mm
10.17 Char/inch
0.40 Char/mm
F 26 x 13 3 U-L-D
0.128" x 0.079"
3.25 mm x 2.00 mm
12.71 Char/inch
0.50 Char/mm
G 60 x 40 8 U-L-D
0.295" x 0.236"
7.50 mm x 6.00 mm
4.24 Char/inch
0.17 Char/mm
H 21 x 13 6 OCR-A
0.103" x 0.093"
2.63 mm x 2.38 mm
10.71 Char/inch
0.42Char/mm
GS 24 x 24 0 SYMBOL
0.118" x 0.118"
3.00 mm x 3.00 mm
8.48 Char/inch
0.33 Char/mm
Ø Default: 15 x 12 U-L-D Scalable (smooth) font
Zebra XiII-Series User’s Guide 83
95
H:...Xi2UsersGuideR2.vp
Fri Aug 07 10:37:27 1998
Color profile: Disabled
Composite Default screen